L'index des Montres Sandoz Fils And Co Sandoz Fils And Co autres horlogerie

Détails (11 résultats)

• Date de vente : 11/03/2012

  Pays : Suisse

  
  

  Antiquorum #260 - 2012-03 - Important Modern and Vintage Timepieces

  Geneva

  ID Lot : 176

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 4375
  • 3570
  • 5002

  Estimation:

  • 2000 - 4000
  • 1632 - 3264
  • 2287 - 4573

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Condition : Bon état

  Période : 1910's

  Forme du boitier : Rond

  
  

  ROUNDING-UP TOOL.Sandoz Fils & Co., La Chaux-de-Fonds & Bienne, Swiss. Made.circa 1910..Fine, brass and steel rounding-up tool on wooden base with.drawer containing a selection of cutting wheels..To be sold without reserve

  
  

  Description : Crank lever wheel, geared via two pulleys, adjustable.horizontal slide, centered cutter with stop screw and.vertical adjustment by two screws, steel rise-and-fall lever.horizontally adjustable dead center wheel holder, circular.foot on wooden base with drawer containing cutting wheels.and brass chucks..Dim. 32 x 29 x 18 cm..In good condition, cleaned.

  ROUNDING-UP TOOL.Sandoz Fils & Co., La Chaux-de-Fonds & Bienne, Swiss. Made.circa 1910..Fine, brass and steel rounding-up tool on wooden base with.drawer containing a selection of cutting wheels..To be sold without reserve

  Réduire la description Voir la description de notre expert

  Description : Crank lever wheel, geared via two pulleys, adjustable.horizontal slide, centered cutter with stop screw and.vertical adjustment by two screws, steel rise-and-fall lever.horizontally adjustable dead center wheel holder, circular.foot on wooden base with drawer containing cutting wheels.and brass chucks..Dim. 32 x 29 x 18 cm..In good condition, cleaned.
• Date de vente : 20/03/2010

  Pays : Suisse

  
  

  Antiquorum #227 - 2010-03 - Important Watches

  Geneva

  ID Lot : 367

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 540
  • 441
  • 617

  Estimation:

  • 2000 - 3000
  • 1632 - 2448
  • 2287 - 3430

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Condition : Bon état

  Matière boîtier : Métal

  Forme du boitier : Rond

  
  

  Rounding-Up Tool.Exa, retailed by Sandoz Fils & Co., La.Chaux-de- Fonds & Bienne, Swiss. Made.in the 20th century..Fine, painted steel rounding-up tool on.wooden base..To be sold without reserve

  
  

  Description : Cast steel crank lever wheel geared.via two pulleys, centered cutter with.stop screw and vertical adjustment by.a two screws and a sprung rise-and-fall.steel lever, horizontally adjustable dead.center, circular steel foot on wooden.base. Signed on a plaque on the base..Dim. 25 x 21 x 15 cm..In good condition, cleaned

  Rounding-Up Tool.Exa, retailed by Sandoz Fils & Co., La.Chaux-de- Fonds & Bienne, Swiss. Made.in the 20th century..Fine, painted steel rounding-up tool on.wooden base..To be sold without reserve

  Réduire la description Voir la description de notre expert

  Description : Cast steel crank lever wheel geared.via two pulleys, centered cutter with.stop screw and vertical adjustment by.a two screws and a sprung rise-and-fall.steel lever, horizontally adjustable dead.center, circular steel foot on wooden.base. Signed on a plaque on the base..Dim. 25 x 21 x 15 cm..In good condition, cleaned
• Date de vente : 03/10/2009

  Pays : Suisse

  
  

  Antiquorum #221 - 2009-10 - Important Collectors’ Wristwatches, Pocket Watches, Clocks & Horological Tools

  Geneva

  ID Lot : 311

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 600
  • 490
  • 686

  Estimation:

  • 2000 - 3000
  • 1632 - 2448
  • 2287 - 3430

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Condition : Bon état

  Matière boîtier : Métal

  Forme du boitier : Rond

  
  

  Rounding-Up Tool.Exa, retailed by Sandoz Fils & Co..La Chaux-de- Fonds & Bienne, Swiss. Made in.the 20th century..Fine, painted steel rounding-up tool on wooden.base..To be sold without reserve

  
  

  Description : Cast steel crank lever wheel geared via two.pulleys, centered cutter with stop screw and.vertical adjustment by a two screws and a sprung.rise-and-fall steel lever, horizontally adjustable.dead center, circular steel foot on wooden.base..Signed on a plaque on the base..Dim. 25 x 21 x 15 cm..In good condition, cleaned

  Rounding-Up Tool.Exa, retailed by Sandoz Fils & Co..La Chaux-de- Fonds & Bienne, Swiss. Made in.the 20th century..Fine, painted steel rounding-up tool on wooden.base..To be sold without reserve

  Réduire la description Voir la description de notre expert

  Description : Cast steel crank lever wheel geared via two.pulleys, centered cutter with stop screw and.vertical adjustment by a two screws and a sprung.rise-and-fall steel lever, horizontally adjustable.dead center, circular steel foot on wooden.base..Signed on a plaque on the base..Dim. 25 x 21 x 15 cm..In good condition, cleaned
• Date de vente : 03/10/2009

  Pays : Suisse

  
  

  Antiquorum #221 - 2009-10 - Important Collectors’ Wristwatches, Pocket Watches, Clocks & Horological Tools

  Geneva

  ID Lot : 307

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 4080
  • 3329
  • 4665

  Estimation:

  • 2200 - 3200
  • 1795 - 2611
  • 2515 - 3659

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Condition : Bon état

  ID Montre : 5367

  Matière boîtier : Laiton

  Forme du boitier : Rond

  
  

  Rounding-Up Tool.Retailed by Sandoz Fils & Co., La Chaux-de- Fonds.Bienne, No. 5367, Swiss. Made in the late 19th century..Fine, brass and steel rounding-up tool on wooden base with.selection of cutting wheels.

  
  

  Description : Brass crank lever wheel, geared via two pulleys, adjustable.horizontal slide, centered cutter with stop screw and vertical.adjustment by two screws, steel rise-and-fall lever, horizontally.adjustable dead center wheel holder, circular brass foot on.wooden base with drawer containing cutting wheels and brass.chucks. Signed on a plaque on the base..Dim. 30 x 24 x 15 cm..In good condition, cleaned

  Rounding-Up Tool.Retailed by Sandoz Fils & Co., La Chaux-de- Fonds.Bienne, No. 5367, Swiss. Made in the late 19th century..Fine, brass and steel rounding-up tool on wooden base with.selection of cutting wheels.

  Réduire la description Voir la description de notre expert

  Description : Brass crank lever wheel, geared via two pulleys, adjustable.horizontal slide, centered cutter with stop screw and vertical.adjustment by two screws, steel rise-and-fall lever, horizontally.adjustable dead center wheel holder, circular brass foot on.wooden base with drawer containing cutting wheels and brass.chucks. Signed on a plaque on the base..Dim. 30 x 24 x 15 cm..In good condition, cleaned
• Date de vente : 29/03/2009

  Pays : Suisse

  
  

  Antiquorum #213 - 2009-03 - Important Collectors Watches, Pocket Watches & Clocks

  Geneva

  ID Lot : 254

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 600
  • 490
  • 686

  Estimation:

  • 800 - 1200
  • 653 - 979
  • 915 - 1372

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Matière boîtier : Métal

  Forme du boitier : Rond

  
  

  Rounding-Up Tool.Sixis, retailed by Sandoz Fils & Co., La Chaux-de-.Fonds & Bienne, Swiss. Made in the 20th century..Fine, painted steel rounding-up tool on wooden base with.extra cutters..To be sold without reserve

  
  

  Description : Cast steel crank lever wheel geared via two pulleys, centered.cutter with stop screw and vertical adjustment by a two screws.and a rise-and-fall steel lever, horizontally adjustable dead center.circular steel foot on wooden base with a drawer for holding the.cutting tools and centers. Dim. 30 x 40 x 16 cm..In good clean condition, cleaned

  Rounding-Up Tool.Sixis, retailed by Sandoz Fils & Co., La Chaux-de-.Fonds & Bienne, Swiss. Made in the 20th century..Fine, painted steel rounding-up tool on wooden base with.extra cutters..To be sold without reserve

  Réduire la description Voir la description de notre expert

  Description : Cast steel crank lever wheel geared via two pulleys, centered.cutter with stop screw and vertical adjustment by a two screws.and a rise-and-fall steel lever, horizontally adjustable dead center.circular steel foot on wooden base with a drawer for holding the.cutting tools and centers. Dim. 30 x 40 x 16 cm..In good clean condition, cleaned
• Date de vente : 16/03/2008

  Pays : Suisse

  
  

  Antiquorum #203 - 2008-03 - Important Collectors' Watches, Pocket Watches & Clocks

  Geneva

  ID Lot : 60

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 1440
  • 1175
  • 1646

  Estimation:

  • 1500 - 2500
  • 1224 - 2040
  • 1715 - 2858

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Condition : Bon état

  Matière boîtier : Laiton

  Forme du boitier : Rond

  
  

  Rounding-Up Tool.Sandoz Fils & Co., La Chaux-de-Fonds & Bienne. Made in.the late 19th century..To be sold without reserve

  
  

  Description : Fine, brass and steel rounding-up tool on wooden base with.drawer..Large, brass crank lever wheel, adjustable horizontal slide, centered.cutter with stop screws, stationary dead center wheel holder, circular.brass foot on wooden base with drawer containing brass chucks..Dim. 25.5 x 24.7 x 16 cm..In good condition, cleaned.

  Rounding-Up Tool.Sandoz Fils & Co., La Chaux-de-Fonds & Bienne. Made in.the late 19th century..To be sold without reserve

  Réduire la description Voir la description de notre expert

  Description : Fine, brass and steel rounding-up tool on wooden base with.drawer..Large, brass crank lever wheel, adjustable horizontal slide, centered.cutter with stop screws, stationary dead center wheel holder, circular.brass foot on wooden base with drawer containing brass chucks..Dim. 25.5 x 24.7 x 16 cm..In good condition, cleaned.
• Date de vente : 16/03/2008

  Pays : Suisse

  
  

  Antiquorum #203 - 2008-03 - Important Collectors' Watches, Pocket Watches & Clocks

  Geneva

  ID Lot : 65

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 1800
  • 1469
  • 2058

  Estimation:

  • 1500 - 2500
  • 1224 - 2040
  • 1715 - 2858

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Condition : Bon état

  Période : 1930's

  Forme du boitier : Rond

  
  

  Rounding-Up Tool.Sandoz Fils & Co, La Chaux-de-Fonds & Bienne..Made circa 1930..Fine brass and steel rounding-up tool..To be sold without reserve

  
  

  Description : Large black painted cast iron crank lever wheel, hinged.cutter frame with two stop screws, stationary dead center.wheel holder, circular cast iron foot on wooden base with.applied signature plaque..Signed on a plaque on the base..Dim. 41 x 25 cm..In good condition, cleaned

  Rounding-Up Tool.Sandoz Fils & Co, La Chaux-de-Fonds & Bienne..Made circa 1930..Fine brass and steel rounding-up tool..To be sold without reserve

  Réduire la description Voir la description de notre expert

  Description : Large black painted cast iron crank lever wheel, hinged.cutter frame with two stop screws, stationary dead center.wheel holder, circular cast iron foot on wooden base with.applied signature plaque..Signed on a plaque on the base..Dim. 41 x 25 cm..In good condition, cleaned
• Date de vente : 14/11/2004

  Pays : Suisse

  
  

  Antiquorum #75 - 2004-11 - Important Watches, Collectors’ Wristwatches and Clocks

  Geneva

  ID Lot : 208

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 1955
  • 1595
  • 2235

  Estimation:

  • 1000 - 1200
  • 816 - 979
  • 1143 - 1372

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Condition : Bon état

  Période : 1930's

  Forme du boitier : Rond

  
  

  Sandoz Fils & Co, La Chaux-de-Fonds & Bienne, nne, circa 1930. Fine brass and steel rounding-up tool.

  
  

  Description : C. Large black painted cast iron crank lever wheel, hinged cutter frame withtwo stop screws, stationary dead center wheel holder, circular cast iron footon wooden base.Dim. 41 x 12 cm.In good condition

  Sandoz Fils & Co, La Chaux-de-Fonds & Bienne, nne, circa 1930. Fine brass and steel rounding-up tool.

  Réduire la description Voir la description de notre expert

  Description : C. Large black painted cast iron crank lever wheel, hinged cutter frame withtwo stop screws, stationary dead center wheel holder, circular cast iron footon wooden base.Dim. 41 x 12 cm.In good condition
• Date de vente : 14/11/2004

  Pays : Suisse

  
  

  Antiquorum #75 - 2004-11 - Important Watches, Collectors’ Wristwatches and Clocks

  Geneva

  ID Lot : 206

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 5060
  • 4128
  • 5785

  Estimation:

  • 2500 - 3000
  • 2040 - 2448
  • 2858 - 3430

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Condition : Bon état

  Période : 19thx

  
  

  Sandoz Fils & Co., La Chaux-de-Fonds & Bienne, circa 1890. Fine brass and steel rounding up tool. Large crank lever wheel, horizontal depth slide controlled by a knurled nut, two stop posts, wooden base with a drawer for additional cutters and cutter chuc

  Sandoz Fils & Co., La Chaux-de-Fonds & Bienne, circa 1890. Fine brass and steel rounding up tool. Large crank lever wheel, horizontal depth slide controlled by a knurled nut, two stop posts, wooden base with a drawer for additional cutters and cutter chuc

  Réduire la description Voir la description de notre expert
• Date de vente : 17/05/2004

  Pays : Suisse

  
  

  Bonhams #11293 - 2004-05 - Fine Watches

  Geneva

  ID Lot : 120

   

  • CHF
  • EUR
  • USD

  Vendu:

  • 1762
  • 1438
  • 2014

  
  

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Période : 1900's

  
  

  A nickel rounding-up tool

  
  

  Description : Sandoz Fils & Co. circa 1900 crank lever wheel activating the pulley through the central wheel, wooden base with drawer containing cutters. 245 mm

  A nickel rounding-up tool

  Réduire la description Voir la description de notre expert

  Description : Sandoz Fils & Co. circa 1900 crank lever wheel activating the pulley through the central wheel, wooden base with drawer containing cutters. 245 mm
• Sandoz Fils And Co : Sandoz Fils And Co autres horlogerie
  Date de vente : 11/10/2003

  Pays : Suisse

  
  

  Antiquorum #44 - 2003-10 - Exceptional horologic works of art

  Geneva

  ID Lot : 174

  Marque : Sandoz Fils And Co

  Modèle : Sandoz Fils And Co autres horlogerie

  
  

  Catégorie : Autres

  Condition : Bon état

  Période : 1920's

  
  

  Connectez-vous pour consulter la suite des résultats

  Sandoz Fils & Co., La Chaux- De-Fonds, Bienne, circa 1920. Fine japanned rounding-up tool. Large crank lever wheel driving the pulley through an intermediate nickel wheel, lever controlled vertical slide with two knurled stop screws, wheel between turns o

  Réduire la description Voir la description de notre expert